Frigidaire FFUE1326AV

Fits a cabinet opening of 29″ W × 69″ H — clearances included.

Key specifications

68″Height
28″Width
Depth
13Cu ft

13 cu ft — about right for one or two people.

Depth classCounter-Depth
BrandFrigidaire
Model numberFFUE1326AV
Minimum cabinet opening (standard clearances included): 29″ W × 69″ H × depth pending. Leave ~½″ at the sides and top, ~2″ at the rear.

As a counter-depth model it sits nearly flush with a standard 24–25″ cabinet — the doors and handles still project an inch or two. Counter-depth vs standard-depth →

28" W 68" H ≈ 1" clearance · airflow & door swing Leave ≈ 2" at the rear for connections
Frigidaire FFUE1326AV · required cutout & clearance · measurements in inches
Rear depth not yet published for this model. counter-depth refrigerators like this typically run 24–30″ deep (cabinet body, excluding handles) — a working figure for the will-it-fit check, not this unit’s measured depth. We publish each model’s exact measured depth once it’s confirmed against the manufacturer spec sheet. Height and width above are verified — check them against your opening with the will-it-fit tool.

Compare similar models

ModelH × W × DCu ft
Bosch B10CB81NV 70 × 24 × — 10.3
Liebherr C5250 73 × 24 × — 11.4
Conserv RF 331-120 (**) 75 × 24 × — 11.7
Liebherr C5740IM 80 × 24 × — 12.8

Source: ENERGY STAR certified-product data.

Frequently asked

What are the dimensions of the Frigidaire FFUE1326AV?
The Frigidaire FFUE1326AV measures 68″ H × 28″ W, 13 cu ft.
Will the Frigidaire FFUE1326AV fit my opening?
Plan for an opening of at least 29″ W × 69″ H once you add clearances. Check yours with the will-it-fit tool.
How deep is the Frigidaire FFUE1326AV?
Its exact measured depth isn’t individually published yet, but counter-depth refrigerators like this typically run 24–30″ deep (cabinet body, excluding handles). We confirm each model’s depth against the manufacturer spec sheet before publishing it — the height and width above are already verified.

Measured from official ENERGY STAR data + manufacturer spec sheets · Last verified May 2026