GE Profile Refrigerator Dimensions: Sizes by Type

GE Profile sits a step above standard GE — the lineup leans to French-door, side-by-side and built-in refrigerators, with laundry and cooking alongside. “GE Profile dimensions” depends on the type, so here are the typical sizes plus every model we track.

Typical GE Profile refrigerator dimensions

Type	Width	Height	Depth
French door (standard-depth)	33–36″	69–70″	34–36″
French door (counter-depth)	33–36″	69–70″	~31″
Side-by-side	36″	69–70″	33–35″
Built-in / panel-ready column	24, 30, 36″	~84″	~24″ (flush)

Typical ranges from the GE Profile models we track. Built-in and panel-ready units need a finished cabinet opening — size it from the model’s spec sheet.

Fit notes

Counter-depth vs standard. Profile’s counter-depth French-door models trim total depth to about 31″ so doors sit near-flush with countertops — at the cost of a few cubic feet.
36″ means a 36″ opening. The case is just under 36″; leave the small side and top air gap GE specifies, plus door-swing room.
Built-ins install differently. The 24″-deep panel-ready columns finish flush with cabinetry and need a framed niche, not a freestanding gap.

GE Profile models we track

Model	Brand	H × W	Cu ft
GE Profile PGD29BYT	GE Profile	69 7/8″ × 35 5/8″	28.7
GE Profile PGE29BYT	GE Profile	69 7/8″ × 35 5/8″	28.7
GE Profile PAD28BYT	GE Profile	69 7/8″ × 35 5/8″	28.4
GE Profile PAE28BYT	GE Profile	69 7/8″ × 35 5/8″	28.3
GE Profile PVD28BYNF	GE Profile	68.6″ × 35.8″	27.9
GE Profile PVD28BYNG	GE Profile	68.6″ × 35.8″	27.9
GE Profile PVD28BYNH	GE Profile	68.6″ × 35.8″	27.9
GE Profile PVD28BYNI	GE Profile	68.6″ × 35.8″	27.9
GE Profile PVD28BYNJ	GE Profile	68.6″ × 35.6″	27.9
GE Profile PVD28HYY	GE Profile	68.6″ × 35.6″	27.9
GE Profile PVD28BYNB	GE Profile	68.6″ × 35.8″	27.9
GE Profile PVD28BYNC	GE Profile	68.6″ × 35.8″	27.9
GE Profile PVD28BYND	GE Profile	68.6″ × 35.8″	27.9
GE Profile PVD28BYNE	GE Profile	68.6″ × 35.8″	27.9
GE Profile PFE28KYN	GE Profile	69.9″ × 35.8″	27.8
GE Profile PFE28PYN	GE Profile	69.9″ × 35.8″	27.8
GE Profile PFE28KBL	GE Profile	69.9″ × 35.8″	27.8
GE Profile PFE28KMK	GE Profile	69.9″ × 35.8″	27.8
GE Profile PSE25KYH	GE Profile	69 1/4″ × 35 3/4″	25.3
GE Profile PNE25JGK	GE Profile	69.6″ × 32.8″	24.7
GE Profile PNE25JMK	GE Profile	69.6″ × 32.8″	24.7
GE Profile PNE25JSK	GE Profile	69.6″ × 32.8″	24.7
GE Profile PNE25NGL	GE Profile	69.6″ × 32.8″	24.7
GE Profile PNE25NML	GE Profile	69.6″ × 32.8″	24.7
GE Profile PNE25NYR	GE Profile	69.7″ × 32.8″	24.7
GE Profile PSB42YSNSS	GE Profile	84″ × 42″	24.5
GE Profile PFE24HGL	GE Profile	69.6″ × 32.8″	23.8
GE Profile PFE24HML	GE Profile	69.6″ × 32.8″	23.8
GE Profile PFE24HYR	GE Profile	69.7″ × 32.8″	23.6
GE Profile PJD23BYW	GE Profile	69.9″ × 35.6″	23.3
GE Profile PWE23KEL	GE Profile	69.9″ × 35.8″	23.2
GE Profile PJE23BYW	GE Profile	69.9″ × 35.6″	23.2
GE Profile PWE23KMK	GE Profile	69.9″ × 35.8″	23.2
GE Profile PWE23KYN	GE Profile	69.9″ × 35.8″	23.2
GE Profile PHD23BYW	GE Profile	70″ × 36″	22.9
GE Profile PXD22BYP	GE Profile	70″ × 35.6″	22.4
GE Profile PXD22HYY	GE Profile	68.6″ × 35.6″	22.4
GE Profile PYE22KBL	GE Profile	69.9″ × 35.8″	22.2
GE Profile PYE22KEL	GE Profile	69.9″ × 35.8″	22.2
GE Profile PYE22KMK	GE Profile	69.9″ × 35.8″	22.2

Showing 40 of 77 models · sorted by capacity · source: ENERGY STAR certified-product data.

GE Profile dimensions — common questions

What are typical GE Profile refrigerator dimensions?

Most GE Profile refrigerators are 33–36″ wide, 69–70″ tall and 31–36″ deep, depending on whether it’s counter-depth or standard-depth.

Does GE Profile make counter-depth refrigerators?

Yes — several French-door Profile models are counter-depth, around 31″ total depth so the doors align with standard countertops.

How wide is a GE Profile built-in refrigerator?

Built-in and panel-ready Profile columns come in 24, 30 and 36″ widths and run about 84″ tall to align with cabinetry.

Measured from official ENERGY STAR data + manufacturer spec sheets · Last verified June 2026